Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Greenwich Village?
Panel replacement in Greenwich Village typically costs $250-$500 for a residential sectional door, depending on how many panels are damaged and whether the section carries windows or custom detailing. A single mid-door panel usually lands in the lower half of that range, while upper sections or panels with decorative inserts sit toward the top. The written estimate sets the final price.
That’s the short answer most homeowners want before they pick up the phone. From there, the details matter: townhouse carriage-house doors, narrow older garages, and modern insulated doors all price differently, and we’ll walk through each in the sections below so you can plan for the right number. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday, with same-day service on most panel calls. Call (844) 395-2808 for a free estimate.
Key Takeaways
- Typical panel replacement in Greenwich Village runs $250-$500 per job.
- Single-panel swaps usually sit at the low end; multi-panel or windowed sections at the high end.
- Matched-panel color and texture availability is the biggest swing factor on cost.
- We work with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors and openers.
- Free estimates, upfront pricing, and same-day service on most calls.
Panel Replacement Cost Breakdown (2026)
Here’s how the pieces of a panel replacement job typically break down in the Greenwich Village market. These are estimated ranges for 2026; the written estimate after we see the door sets the final price.
| Line Item | Typical Estimated Range |
|---|---|
| Single panel replacement (standard steel or woodgrain) | $250-$360 |
| Multiple panels replaced in one visit | $360-$500 |
| Panel with windows or decorative inserts | $300-$500 |
| Panel plus hardware (hinges, rollers, brackets) | $280-$450 |
| Color-matched or textured panel to match an older door | $300-$500 |
| Track realignment if the dents bent the track | $120-$240 |
| Roller replacement alongside the panel | $110-$220 |
If the damage extends past the panel to the springs or cables, spring repair runs $180-$340 for one spring (a matched pair costs about twice that because both are usually replaced together), and cable repair runs $130-$250. Opener problems add $120-$320 for repair or $250-$550 for a new opener install. A full garage door repair job that touches several systems at once typically falls in the $150-$600 range, and a brand-new door installation runs $700-$2200 depending on size and material.
Panel replacement is our lead service on this page because it’s the most common single fix we’re called out for: a car bumper, a misjudged bike rack, a delivery truck’s lift gate, or a stray branch that clips the bottom section. Because a panel replacement is a targeted repair, it’s often the cheapest path back to a functioning, weather-tight door. We always quote the full job before we start.
What Affects Panel Replacement Pricing in Greenwich Village
Two panels on the same street can price very differently. A woodgrain steel panel on a Clopay door and a carriage-house style panel on an older townhouse are entirely different parts, sourced from different lines, finished in different colors. Here are the factors that move the number most in Greenwich Village:
- Panel count. One panel is the low end of the range. Two or three panels replaced in one visit climb toward $500, but they’re still cheaper than replacing the whole door because the labor overlaps.
- Windowed or decorative sections. Panels with glazing or stamped inserts carry a higher part cost and take longer to align. Expect the upper end of the $250-$500 band.
- Color and texture matching. Older doors in Greenwich Village often predate the current catalog, so a close texture and profile match can require sourcing from a stocked line or waiting on a factory run. That said, most manufacturers we work with (Clopay, Amarr, Wayne Dalton, Raynor) keep longstanding panel designs available for years, which helps.
- Adjacent track or hardware damage. A hard impact that dents a panel often bends the track too, so add track realignment at $120-$240 if the door grinds or wanders on the way up.
- Building access and parking. Many Greenwich Village garages open onto a narrow court, mews, or basement-level driveway where a truck can’t pull flush to the door. Longer carry distances and parking limits affect the visit time.
- Door age and the opener it’s paired with. If the door is a legacy model paired with a Craftsman or Genie opener, we check the balance and travel limits at the same time. Mismatched force settings can cause repeat damage, so fixing that once saves a return trip.
You’ll notice one factor missing from that list: we don’t charge extra because a job is urgent, or because the door is stuck open and needs to come down fast. Pricing is per job and set by the written estimate, and the same range applies whether you call at 8am or at 9pm.
How Much Does a Panel Replacement Take and Can It Be Done the Same Day?
Most single-panel replacements take one to two hours on-site, and the panel itself is often the only wait. If we have a matching panel in stock or can source it from a local supplier, we can usually finish the job the same day. Custom colors, windowed inserts, or discontinued profiles can add a few days for the part to arrive.
Most garage door calls are same-day problems. A panel knocked out by a neighbor’s bumper, a door stuck partway because a roller jumped out of a bent section, or a delivery driver who took the bottom corner off with a hand truck: these need a fix today, not next week. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday calls are booked into the next opening on Sunday. Call (844) 395-2808 for a free estimate, and we’ll tell you honestly whether the part is a same-day swap or a short wait.
Repair or Replace the Whole Door?
Panel replacement is usually the right call when the door is otherwise sound: the springs balance the door, the tracks are straight, and the opener travels smoothly. If two or more sections are damaged, the panels are obsolete and can’t be matched, or the springs and cables are already showing strain, then a full door installation in the $700-$2200 range may be the cheaper long game. Our rule of thumb: if a panel replacement comes to more than about half the cost of a new door and the door is already worn, we’ll walk you through both options with real numbers before you decide.
Want to see the panel work we do in more detail? Have a look at our panel replacement page for the full scope, or start with our main Garage Door Repair Greenwich Village service overview if you’re not sure which system is causing the trouble.
What to Check Before You Call About a Damaged Panel
You don’t need to fix anything yourself, but a quick look helps us quote faster over the phone:
- Count the damaged sections. One, two, or more? The bottom panel is the most commonly hit, but the second panel takes damage too when the bottom one buckles.
- Check whether the door sits level. If one side hangs lower, the problem may be a cable or spring rather than a panel. Those are separate repairs with their own ranges, and they’re dangerous to touch.
- Note any grinding or scraping. That usually means the track is bent. Tell us, and we’ll plan for a realignment along with the panel.
- Snap a photo of the door. It helps us pre-check brand and panel style. If you can, note the brand: Clopay, Amarr, Wayne Dalton, Raynor, or an older LiftMaster or Chamberlain paired door is most common.
A safety note. Springs, cables, and the torsion bar under tension are genuinely dangerous. A garage door can weigh hundreds of pounds, and a snapped spring or a cable under load can move with enough force to cause serious injury. We do not recommend trying to adjust, lift, or dislodge a bent panel or a stuck door yourself, and we don’t walk homeowners through spring or cable work step by step. If the door is stuck open or a spring has snapped, keep clear of the moving parts and call us. This is exactly why spring and cable work is handled by trained professionals, not general handymen or hardware store kits.
How to Save on Panel Replacement
There’s no magic discount, but a few sensible moves keep the number at the low end of the $250-$500 range:
- Fix it early. A single dented bottom panel is a $250-$360 job. Leave it and the panel can bind, bend the track, and eventually strain the opener, which is how a small repair turns into a multi-system call.
- Bundle small fixes into one visit. If the rollers are worn or the track is slightly out, doing them the same time as the panel is cheaper than a second call. Roller replacement is $110-$220, track realignment $120-$240, both cheaper alongside the panel.
- Ask for a standard profile in a common color. Factory-stocked panels cost less and arrive faster than special-order finishes.
- Get the free estimate in writing. We quote the full job before we start, so you know the number up front. Call (844) 395-2808.
We work on the brand you already have, which matters here: a panel replacement on a Clopay door needs a Clopay-compatible panel, not a universal blank. Because we’re fluent across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, we don’t need to refer you out or come back twice with the wrong part.
FAQs – Panel Replacement Cost in Greenwich Village
How much does panel replacement cost in Greenwich Village?
Panel replacement in Greenwich Village typically costs $250-$500, depending on the number of panels, whether they carry windows or decorative inserts, and how easily a color match can be sourced. The written estimate sets the final price. Call (844) 395-2808 for a free estimate.
Can you replace just one panel, or do I need a whole new door?
Yes, a single panel can almost always be replaced on its own. On a standard sectional door, one panel swap runs $250-$360. A whole new door is only worth considering if several panels are damaged and the door’s springs and tracks are already worn; that full installation runs $700-$2200. Call (844) 395-2808 and we’ll tell you honestly which makes more sense.
Is it cheaper to repair the panel or replace it?
Replacement is usually cheaper than repair for a dented or cracked panel, because a bent panel can’t be reliably straightened back to a weather-tight seal. A single-panel replacement at $250-$360 is often less than what a shop would charge to attempt a repair that doesn’t last. Call (844) 395-2808 for a free estimate on your specific door.
Can you come today if my door is stuck?
Yes, on most same-day calls. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. If your door is stuck open and you’re worried about security, call (844) 395-2808 and we’ll get you into the next available slot.
Will my panel match the color of the rest of the door?
In most cases, yes. Common profiles on Clopay, Amarr, Wayne Dalton, and Raynor doors are matched by color name and texture code, and an exact match is usually available. Older or discontinued doors may need a close match rather than an exact one, which we’ll explain at the estimate. Call (844) 395-2808 with the door brand and a photo, and we’ll confirm what’s available.
Related Services
Panel replacement often comes up alongside other garage door work. If your door is grinding or hanging unevenly, track realignment is $120-$240 and roller replacement is $110-$220, and both are cheaper when bundled with the panel visit. If the opener is struggling to lift the door after a panel swap, opener repair runs $120-$320, and a new opener install is $250-$550. For legacy Craftsman or Genie openers and modern LiftMaster or Chamberlain myQ systems, we handle diagnostics and repair in-house, so you only deal with one contractor for the door, the springs, and the opener. Know your opener, know your door.
From opener to spring to panel, we cover the whole system. Have a look at our main garage door help if you’re not sure where the fault lies.
Get Your Free Panel Replacement Estimate
Whether it’s one panel knocked out by a car bumper or a full row of dented sections after a storm, the fastest way to a real number is a quick call. Our technicians have up to 12 years of experience, we work with every major residential brand, and we’ll quote the full job in writing before we touch the door. Call (844) 395-2808. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Free estimates, upfront pricing, and a same-day fix wherever the part is available.
Written by the team at Garage Door Repair Greenwich Village.
Pricing reflects the Greenwich Village market as of 2026. Garage Door Repair Greenwich Village offers free estimates – call (844) 395-2808.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Yusuf Karam"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Renee Ziegler"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Eduardo Garcia